Sicass Racing Flat Mount Rear L.E.D. Turn Signals KTM EXC/Husqvarna FE-S/FE 2007-2022

Flush mount Ultra Brite LED turn signals with the factory KTM connectors for a direct plug unit. Mounts to any flat surface using a through screw.

  • KTM EXC 2007-2022 (SEE NOTE BELOW)
  • Husqvarna FE-S Models 2014-2016 (SEE NOTE BELOW)
  • Husqvarna FE Models 2017-2019 (SEE NOTE BELOW)
  • Husqvarna FE-S Models 2020-2022 (SEE NOTE BELOW)

If installing on a 07-22 KTM EXC, a 2014-16 Husqvarna FE-S, a 2017-19 Husqvarna FE, or a 2020 Husqvarna FE-S you may also need parts 22-298 and 22-300. (SEE BELOW)

*If you plan to use LED turn signals on the front AND rear, then you will need to install the 22-298 AND the 22-300.

*If running one set of LED and one set of standard bulb turn signals you do not need the 22-298 nor are you required to install the 22-300 smart flasher.
In this case the turn signals will blink slightly faster. If you wish to correct the flash rate install the 22-300.


This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65

be the first to know