Direct replacement turn signals for the 22-206/22-209/22-210 hand guards with integrated turn signals.

Available with universal wiring or KTM EXC (2007-25) OEM matching connectors.

WITH OEM CONNECTOR VERSION FITS:

• 2007-25 KTM EXC (SEE NOTES BELOW)
• 2014-16 Husqvarna FE-S Models (SEE NOTES BELOW)
• 2017-19 Husqvarna FE Models (SEE NOTES BELOW)
• 2020-25 Husqvarna FE-S Models (SEE NOTES BELOW)

NOTES:

2007-23 KTM EXC, 2014-16 Husqvarna FE-S, 2017-19 Husqvarna FE, 2020-23 Husqvarna FE-S

You may also need additional parts for the turn signal system to work properly:

• *If you plan to use LED turn signals on the front AND rear, then you will need to install the 22-298 AND the 22-300.
• *If running one set of LED and one set of standard bulb turn signals you do not need the 22-298 nor are you required to install the 22-300 smart flasher.
  
  In this case the turn signals will blink slightly faster. If you wish to correct the flash rate install the 22-300.

2024-25 KTM EXC, 2024-25 FE-S, 2024-25 GasGas ES 350/500

You may also need additional parts for the turn signal system to work properly:

• *Due to the 2024-25 models NOT having a flasher to replace, one set of 22-690 resistors per one set of LED turn signals is required.

PROPOSITION 65

⚠️WARNING

This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65