Ultra-brite LED turn signals with a flexible mounting shaft. Include a small window on the side for increased visibility. Shaped similar to the factory KTM EXC turn signal only smaller and more flexible.

These turn signals are labeled with the E mark on the lens (ECE approved).

FITMENT

• KTM EXC 2007-2022 (SEE NOTE BELOW)
  
• Husqvarna FE-S Models 2014-2016 (SEE NOTE BELOW)
• Husqvarna FE Models 2017-2019 (SEE NOTE BELOW)
• Husqvarna FE-S Models 2020-2022 (SEE NOTE BELOW)

NOTE:
If installing on a 07-22 KTM EXC, a 2014-16 Husqvarna FE-S, a 2017-19 Husqvarna FE, or a 2020 Husqvarna FE-S you may also need parts 22-298 and 22-300. (SEE BELOW)

*If you plan to use LED turn signals on the front AND rear, then you will need to install the 22-298 AND the 22-300.

*If running one set of LED and one set of standard bulb turn signals you do not need the 22-298 nor are you required to install the 22-300 smart flasher.
In this case the turn signals will blink slightly faster. If you wish to correct the flash rate install the 22-300.

PROPOSITION 65

⚠️WARNING

This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65