DS-SUB-3528-01R

Scotts Complete Rubber Sub Mount Damper Kit KTM 690 Enduro/SMC 2008-2018

#5 Best Seller
in Scotts Performance
Version

Shown here is the Complete Rubber Sub Mount Stabilizer Kit (Stabilizer Under Bars) for the 690E and 690SMC. By utilizing specially designed Poly-Urethane bushings we can offer a vibration dampening handlebar mount that will prevent arm pump and dramatically reduce rider fatigue. MED and SOFT bushings are provided. The frame bracket mounts around the stock ignition switch and blends in nicely with the orange or black frames. All pieces are engineered for a clean fit. slight trimming of plastic shroud covering key area is required. The sub mount raises the bars 11mm and locates them between the #2 and #3 positions on the triple clamp. Lower bend bars are available as an option on this site for anyone wanting lower bar positions.

"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation.

Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions.

FITMENT

  • KTM 690 Enduro/SMC 2008-2010 - 

    DS-SUB-3528-01R

  • KTM 690 Enduro/R 2011-2018 | SMC 2011-2016-

    DS-SUB-3528-02R

PROPOSITION 65

⚠️WARNING

This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65

be the first to know

Shown here is the Complete Rubber Sub Mount Stabilizer Kit (Stabilizer Under Bars) for the 690E and 690SMC. By utilizing specially designed Poly-Urethane bushings we can offer a vibration dampening handlebar mount that will prevent arm pump and dramatically reduce rider fatigue. MED and SOFT bushings are provided. The frame bracket mounts around the stock ignition switch and blends in nicely with the orange or black frames. All pieces are engineered for a clean fit. slight trimming of plastic shroud covering key area is required. The sub mount raises the bars 11mm and locates them between the #2 and #3 positions on the triple clamp. Lower bend bars are available as an option on this site for anyone wanting lower bar positions.

"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation.

Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions.

  • KTM 690 Enduro/SMC 2008-2010 - 

    DS-SUB-3528-01R

  • KTM 690 Enduro/R 2011-2018 | SMC 2011-2016-

    DS-SUB-3528-02R

⚠️WARNING

This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65