RGR0001

R&G Micro Indicators - Resistors for Bulb indicators

This part is in stock and ships in 1-2 business days.
Size
1 item left

Are your micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

For R&G Bulb Indicators - Select the 9.8 Ohm resistor (RGR0001)

Includes one pair of 9.8 ohm resistors with bullet connectors.

Using R&G’s replacement Micro Indicators LED turn signals together with these resistors simulates the power consumption of 21-watt original incandescent bulbs. Here’s the math: At 13.4 volts a 9.8 ohm resistor produces a 18.3 watt load. Add in a 2 watt LED indicator and you’re at about 21 watts total.

Not for use if:

  • you’re replacing original LED turn signals with R&G LED turn signals (do not use a resistor)
  • you’re replacing original 10 watt turn signals with R&G LED turn signals (use resistor RGR0002)
  • you’re replacing original 21 watt turn signals with R&G 10 watt incandescent turn signals (use resistor RGR0002)

For R&G LED Indicators - Select the 21.5 Ohm resistor (RGR0002)

After replacing your bike’s original 10 watt incandescent turn signals with R&G Micro Indicators incandescent turn signals (RG370) OR after replacing your bike’s original 10 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.

These are inline resistors NO wire cutting or soldering required.

Includes one pair of 21.5 ohm resistors with bullet connectors.

Not for use if:

  • you’re replacing original LED turn signals with R&G LED turn signals (do not use a resistor)
  • you’re replacing original 21 watt turn signals with R&G LED turn signals (use resistor RGR0001)

FITMENT

  • This is a universal fit part; it may or may not fit without modification.

PROPOSITION 65

⚠️WARNING

This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65

be the first to know

PRODUCT DESCRIPTION

Are your micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

For R&G Bulb Indicators - Select the 9.8 Ohm resistor (RGR0001)

Includes one pair of 9.8 ohm resistors with bullet connectors.

Using R&G’s replacement Micro Indicators LED turn signals together with these resistors simulates the power consumption of 21-watt original incandescent bulbs. Here’s the math: At 13.4 volts a 9.8 ohm resistor produces a 18.3 watt load. Add in a 2 watt LED indicator and you’re at about 21 watts total.

Not for use if:

  • you’re replacing original LED turn signals with R&G LED turn signals (do not use a resistor)
  • you’re replacing original 10 watt turn signals with R&G LED turn signals (use resistor RGR0002)
  • you’re replacing original 21 watt turn signals with R&G 10 watt incandescent turn signals (use resistor RGR0002)

For R&G LED Indicators - Select the 21.5 Ohm resistor (RGR0002)

After replacing your bike’s original 10 watt incandescent turn signals with R&G Micro Indicators incandescent turn signals (RG370) OR after replacing your bike’s original 10 watt incandescent turn signals with R&G Micro Indicators LED turn signals (RG371) you may find that the signals flash too fast or too slow. Adding this resistor resolves this issue. No cutting crimping or soldering required.

These are inline resistors NO wire cutting or soldering required.

Includes one pair of 21.5 ohm resistors with bullet connectors.

Not for use if:

  • you’re replacing original LED turn signals with R&G LED turn signals (do not use a resistor)
  • you’re replacing original 21 watt turn signals with R&G LED turn signals (use resistor RGR0001)
FITMENT
  • This is a universal fit part; it may or may not fit without modification.
PROPOSITION 65

⚠️WARNING

This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65

WARRANTY

Warranty Policy

All parts sold by KTM Twins are covered exclusively under the manufacturer’s warranty, if applicable. KTM Twins does not provide any additional warranties, express or implied, beyond what is offered by the manufacturer.

View our returns policy for more information.

Package Protection

KTM Twins has partnered with Redo to provide customers with the option of Free Returns and Package Protection at checkout.

By selecting this option, your order is protected in the event it is lost, damaged, or stolen during transit, and you’ll also receive the benefit of free return shipping if you need to send something back within 30 days of delivery.

If you choose not to purchase Redo’s Free Returns and Package Protection at checkout, you will be responsible for the cost of return shipping, and KTM Twins will not be liable for packages that are lost, stolen, or damaged in transit.

View our shipping policy for more information.