Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
LOW: This model is 5/8 INCH (17mm) LOWER than the stock seat.
STANDARD: Same height with stock seat
TALL: This is 9/16 inch (15mm) TALLER than the stock seat height
These Complete Seats come assembled with an aftermarket pan and ready to ride.
Note: Our low seat will NOT work on the TPI models and 2 stroke fuel injected models.
Per OEM specifications, the seat bolts should be tightened NO MORE than 4 ft/lbs to prevent tightening or stripping. Over tightening can cause a failure. Cross threading can also be an issue and should be avoided. DO NOT use air tools to tighten seat bolts as it can cause them to be stripped.