Your Cart is Empty


Samco Silicone Radiator Hose Kit KTM 950/990 Super Enduro/SM 2006-2013



Customer Reviews

Based on 1 review Write a review

Upgrade your hoses on your 2006-2009 KTM 950 Supermoto or KTM 950 Super Enduro with this high performance hose kit. This kit has been shown to reduce operating temperatures by up to 7 degrees in some cases. Silicone Hoses resist the tendency to harden up over time and will withstand higher pressures. 

Samco radiator hoses are absolutely unparalleled in quality and performance. Carrying a rock solid guarantee for life, rest assured that these hoses won't leave you stranded in the desert or on the side of the road. With a lustrous finish, they match the bikes absolutely perfectly and add a great looking accent as a bonus. Samco lines are trusted in Formula 1, Moto GP, and hundreds of other top tier motorsports so you know you are in good hands. Every line is visually inspected one by one before they leave the factory.

Note: Hose kit and clamps are sold separately. Please add each to cart to have both.

 *Clamps pictured are illustrative. Appropriate clamps are included for each hose kit. 


  • KTM 950 Supermoto 2006
  • KTM 950 Super Enduro 2007-2009
  • KTM 990 Supermoto 2009-2013



This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65

Customer Reviews

Based on 1 reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review
  • Reviews

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Mathew H.

    One error ruined project

    I bought the hoses because I was having a problem with the radiator being pushed forward by the expansion of the stock hoses so I hoped it would help. It was very pricey but I figured they would last the life of the motorcycle. When I received them everything looked OK, I did notice the crossover "S" hose that passes between the cylinders was about 7 or 8 mm shorter but I thought it would be OK. I removed all the original hoses and started systematically replacing them and everything was going well until that crossover hose. I could NOT get it on the barbs on both sides at the same time and access is limited. Four hours later with both hands bleeding, I finally cut the two short hoses that share pipes with it as short as I could and still it wasn't enough. In the process I put two small nicks in the outer layer of the hose(I know, I know, don't use pliers but I was desperate) so I gave up and put the stock one back on. Now I have a cut up hose set and scabs on my hands. I will gladly return the S hose if you can supply me with a longer one and replacements for the short ones I cut off. I'll even wash the blood off it. Also, I received 4 very small clamps for the over flow bottle tubes, 2 sm/med (25?) 8 med(30?), 4 large clamps. All the middle hoses are the same diameter and the sm/med are big enough and the med are too big to compress the hose perfectly so I don't understand why I only got 2 out of ten of the perfect clamps and 8 that are biggish.(They worked but have a very long "tail") The large and small were fine and I wouldn't have said anything except for the other big problem. I paid more to get this from KTM TWINS as I trust you guys and am generally loyal to people who go the extra mile in service. By the way, I'm a VERY competent mechanic and the folks at Scuderia know me. Please let me know how to proceed with the hose issue. Thanks for reading this, Matt

    KTM Twins

    Hey there Matt - really sorry to hear about your issues with the fitment. Give us a call and ask for Eli. We'll get you taken care of one way or another.

    be the first to know