The CNC machined Manual Cam Chain Tensioner is designed specifically to eliminate the problem of the cam chain jumping and causing engine damage,which can occur with the OEM hydraullically-operated unit when there is a drop in oil pressure.
It is a straight-forward design,and takes approximately 1 hour to fit by any competent mechanic.
- KTM 690 Enduro
- KTM 690 Enduro R
- KTM 690 SMC
- KTM 690 SM
- KTM 690 SMR
- Reviews (12)
Cam chain is much quieter and install took about an hour
Quick install, works well!
Much quieter valvetrain! Didn't use the odd install guide, instead followed the hive mind: pulled old, installed new, torqued larger bolt to spec,light finger tight, start, finger tighten til a light whirring noise on the engine, backed off til it disappeared, set the locknut, torque locknut, spray with brake cleaner, make sure no leaks. Go ride! Not much to it, but it does its job.
Fast shipping and just what the doctor ordered. Highly recomended
Lock Nut too loose
Lock Nut too loose and would strip very easy. I now have a $150 CDN paper weight. Quality assurance must be very poor at Rally Raid. Do not recommend.
KTM 690 duke 2013
different bike . highly recomend