{"title":"Scotts Performance Parts Lead Time","description":"\u003cp\u003eThese Scotts Performance Parts usually ship from our warehouse within 1-2 weeks. Call for availability.\u003c\/p\u003e","products":[{"product_id":"scotts-ktm-690-duke-supermoto-steering-stabilizer-kit","title":"Scotts Complete Top Mount Damper Kit KTM 690 Duke\/Duke R\/SM\/SMC\/SMR\/LC4 1997-2010","description":"\u003cp\u003e\u003cspan\u003eThe bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include a Stabilizer, link arm, handlebar clamp, frame backet, step by step pictured instructions, owners manual and applicable hardware. Some models may require replacement handlebars. We can assist you in that choice also. If you have any questions regarding any installation guidelines or special applications, please give us a call.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Note:\u003c\/strong\u003e The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003e\u003cem\u003e**Note: Once this part is ordered, we will reach out to you to confirm fitment information (year\/model) as well as the bar position of your machine.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 Duke 2008-2010\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 Duke R 2008-2010\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 SM 2007-2008\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 SMC 2007\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 SMR 2008\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM LC4 Dirt Bikes 1997-1999 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":23670666307,"sku":"DS-5972-00","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/1938lg.jpg?v=1734129447"},{"product_id":"scotts-ktm-690-steering-stabilizer-kit","title":"Scotts Complete Rubber Sub Mount Damper Kit KTM 690 Enduro\/SMC 2008-2018","description":"\u003cp\u003e\u003cspan\u003eShown here is the Complete Rubber Sub Mount Stabilizer Kit (Stabilizer Under Bars) for the 690E and 690SMC. By utilizing specially designed Poly-Urethane bushings we can offer a vibration dampening handlebar mount that will prevent arm pump and dramatically reduce rider fatigue. MED and SOFT bushings are provided. The frame bracket mounts around the stock ignition switch and blends in nicely with the orange or black frames. All pieces are engineered for a clean fit. slight trimming of plastic shroud covering key area is required. The sub mount raises the bars 11mm and locates them between the #2 and #3 positions on the triple clamp. Lower bend bars are available as an option on this site for anyone wanting lower bar positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 Enduro\/SMC 2008-2010 - \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cp class=\"sku\"\u003e\u003cspan\u003eDS-SUB-3528-01R\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eKTM 690 Enduro\/R 2011-2018 | \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSMC 2011-2016 -\u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cp class=\"sku\"\u003e\u003cspan\u003eDS-SUB-3528-02R\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"KTM 690 End\/SMC '08-'10","offer_id":23670670467,"sku":"DS-SUB-3528-01R","price":724.0,"currency_code":"USD","in_stock":true},{"title":"KTM 690 End\/R '11-'19 | SMC '11-'16","offer_id":27512743875,"sku":"DS-SUB-3528-02R","price":724.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/690_end_scotts_damper.jpg?v=1734129449"},{"product_id":"scotts-dt-sub-3530-1","title":"Scotts Complete Sub Mount Damper Kit with Triple Clamp KTM 950\/990 ADV 2003-2013","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eShown here is the Complete Sub Mount Stabilizer Kit with Triple Clamp for the 950\/990 ADV. The kit includes a black anodized billet, 5-star rated Scotts triple clamp, Sub mounted Stabilizer, RSA style low-vibration handlebar mounts, anodized frame bracket, hard chromed tower pin, key lock bracket, stem holding tool, all necessary hardware, Owner's manual and step by step pictured instructions. The kit includes a key adaptor that retains the stock key lock. This kit requires drilling out the stock security bolts in the key switch but we provide the procedure to accomplish this fairly easy operation. The triple clamp will raise the bars 10mm and move them forward 21mm for a more desirable riding position. This kit is a dramatic improvement to this motorcycle and is endorsed by Scot Harden and Jimmy Lewis of Paris to Dakar fame. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach mounting kit is bike \u0026amp; position specific\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary mounting hardware and a detailed manual\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003e3 damping fully adjustable damping circuits (high speed, low speed, sweep)\u003c\/li\u003e\n\u003cli\u003eUsed and endorsed by every off-road magazine\u003c\/li\u003e\n\u003cli\u003eHighest quality and best customer support\u003c\/li\u003e\n\u003cli\u003eEasily moved from one motorcycle to another\u003c\/li\u003e\n\u003cli\u003eIncreased high-speed stability\u003c\/li\u003e\n\u003cli\u003eHandlebar position is 10mm higher \u0026amp; 21mm forward from stock\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 950 Adventure 2003-2006\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 990 Adventure 2007-2013\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":33817476995,"sku":"DT-SUB-3530","price":857.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/scotts_2.jpg?v=1734129452"},{"product_id":"scotts-ktm-950-1","title":"Scotts Complete Sub Mount Damper Kit with Triple Clamp KTM 950 Super Enduro 2007-2010","description":"\u003cp\u003eShown here is the Complete Sub Mount Stabilizer Kit with Triple Clamp for the 950SE. The kit includes a black anodized billet, 5-star rated Scotts triple clamp, Sub mounted Stabilizer, RSA style low vibration handlebar mounts, anodized frame bracket, hard chromed tower pin, key lock bracket, stem holding tool, all necessary hardware, Owner's manual and step by step pictured instructions. The kit includes a key adaptor that retains the stock key lock. This kit requires drilling out the stock security bolts in the key switch but we provide the procedure to accomplish this fairly easy operation. The triple clamp will raise the bars 10mm and move them forward 21mm for a more desired riding position. The stabilizer adds significantly to the performance of this bike. This photo does not show the newest style RSA rubber mount but depicts the exact same finished look.\u003c\/p\u003e\n\u003cp\u003eThe term SUB stands for Stabilizer Under Bars. Scotts designed a Triple Clamp to accept the SUB mount putting the Stabilizer Under the Bars while still allowing access for on-the-fly adjustment. The beauty of this design is; you can take your stabilizer from one bike to another without having to buy another stabilizer. The stabilizer unbolts from the mounting components on all of our kits. In addition, our triple clamps received the highest 5-star rating from multiple leading National Magazines, including Dirt Rider and Motocross Action. This triple clamp kit is machined from a 6061 billet block of aluminum and then anodized to give your model that \"Factory bike\" look, while increasing performance in strength, stability, steering and adding clamping surface. Some off-road bikes have such large, awkward triple clamps that stabilizer installation and fuel tank options have become very difficult. The Scotts\/BRP triple clamps are machined to be very attractive and extremely functional, eliminating the majority of problems associated with many after market triple clamps. We also make some triple clamps exclusively that cannot be found anywhere but at Scotts. The Sub Mount kit is designed to use 1 1\/8\" (28mm) oversize handlebars but can be converted back to standard 7\/8\" (22mm) diameter bars by using our optional bar reducers. The SUB Mount Triple clamp kit, in most cases, includes the Scotts\/BRP Triple Clamp with matching anodized barclamp, Scotts steering stabilizer, linkarm, SUB mount frame bracket, all the necessary hardware, step by step pictured instructions and the Owners Manual. The SUB mount typically raises the position of the bars approximately 11-25mm, depending on the model.\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 950 Super Enduro 2007-2010\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":24326465731,"sku":"DT-SUB-3544","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/950se.jpg?v=1734129459"},{"product_id":"scotts-ktm-990-super-duke-steering-stabilizer-kit","title":"Scotts Complete Damper Kit KTM 990 Super Duke\/R 2004-2013","description":"\u003cp\u003e\u003cspan\u003eThe Super Duke gets a serious upgrade to handling and steering precision by adding the stabilizer. This kit bolts on in minutes and enhances this bike considerably. It's nice looking too.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe road bike kits are machined to match exact features of your bike. Each mounting kit is specific to a certain bike. This is one of the best products you can put on a road bike, improving steering, stability, handling and safety considering all the hazards one can face on the road. We have meticulously assembled each kit so they come complete with all the necessary hardware to mount your steering stabilizer. Most kits require only minutes to install. The kit pictured and the majority of kits include: a Stabilizer, link arm, Triple Clamp nut, Frame Bracket, Tower Pin, TC Damper Mount, instruction manual and applicable hardware. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 990 Super Duke 2004-2013\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 990 Super Duke R 2008-2013\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":28896142403,"sku":"RS-59-0056-40F","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/dark_blank_doc_-_copy_-_copy_-_copy_-_copy_-_copy_-_copy_-_copy_-_copy_-_copy_copy.jpg?v=1734129464"},{"product_id":"sfn-9924","title":"Scotts Shark Fin Rear Brake Rotor Guard KTM 690 Enduro\/R\/Husqvarna 701 2008-2019","description":"\u003cp\u003e\u003cspan\u003eIf you ding your brake rotor, you have no brakes, which is bad enough by itself, but if you're racing it means YOU LOSE! The SCOTTS Sharkfin is 3\/8\" thick billet 6061 aluminum, 25% thicker than any others on the market. It is the only fin that incorporates the brake caliper carrier as an integral part of the function. This means the axle passes through the shark fin making it virtually indestructible and your brake rotor protected from defeat. This design is ten times stronger than the \"Bolt-On\" type fins, and it's a beautiful piece of work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e**This fits both ABS and Non-ABS models.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 690 Enduro\/R 2008-2013\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 690 Enduro\/R (with ABS) 2014-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHusqvarna 701 Supermoto\/ Enduro 2016-2019\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":45715527811,"sku":"SFN-9924","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/sfn-9920.jpg?v=1734130487"},{"product_id":"scotts-ds-5972-02","title":"Scotts Complete Top Mount Damper Kit KTM 625\/640\/660 SMC LC4 2004-2007","description":"\u003cp\u003e\u003cspan\u003eDue to the very limited space on this model, the standard Bolt-on kit usually requires some modifications: Must cut the steering lock box slightly as per the instructions, but it remains functional. Most require slight trimming of the back of Triple clamp to allow for pinch bolt clearance (easy mod). Most require counter boring the pinch bolt hole so the bolt goes in farther. We supply a button head bolt to help with this clearance. Most of the mods are simple but require patience to perform. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Note:\u003c\/strong\u003e the kit pictured may not be your exact model but depicts the same idea of what parts come in each kit and how it mounts. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis kit typically will include a Stabilizer, link arm, handlebar clamp, frame backet, step by step pictured instructions, owners manual and applicable hardware. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003e\u003cem\u003e**Note: Once this part is ordered, we will reach out to you to confirm fitment information (year\/model) as well as the bar position of your machine.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 625 \/ 640 SMC LC4 2004-2007\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 660 SMC LC4 2006-2007\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":23678189699,"sku":"DS-5972-02","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/scotts_lc4.jpg?v=1734131212"},{"product_id":"ktm-4200-04","title":"Scotts Offroad Steering Stabilizer\/Damper Unit","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease choose between top mount or sub mount options.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTop Mount: \u003c\/strong\u003eDamper mounts above the handlebars.\u003cstrong\u003e\u003cbr\u003eSub Mount: \u003c\/strong\u003eDamper mounts below the handlebars.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSelect the option that matches your mounting kit. \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003eFor mounting hardware other than Scott's or BRP, please inquire\/call us for necessary part modifications.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe stabilizer itself must be mounted over the centerline of steering stem or pivot point of the forks on a motorcycle, unless you are using linkage that accomplishes the same goal. When ordering a stabilizer only, it will normally come with a standard link-arm, as shown in this picture, that matches the stock bike components that you are ordering it for. Some applications require different lengths and shapes of linkarms due to physical hurdles and depending on the clearances for your particular application. A few special applications do not come with a link-arm at all. Off road stabilizers typically have no rebound valving by design, whereas road bike stabilizer HAVE rebound valving.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"column whole medium-half product-information--purchase\"\u003e\n\u003cdiv class=\"column whole np product-information--description\"\u003e\u003cem\u003e\u003cstrong\u003eReplacement steering stabilizer for Scotts' legendary damper\/stabilizer kits.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Top Mount","offer_id":39980387074142,"sku":"4200-04-TOP","price":360.0,"currency_code":"USD","in_stock":true},{"title":"Sub Mount","offer_id":39980387106910,"sku":"4200-04-SUB","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/839lg.jpg?v=1734191979"},{"product_id":"scotts-1190-adv","title":"Scotts Rubber Sub Mount Damper Kit KTM 1090\/1190\/1290 Adventure\/R\/S\/T 2013-2020","description":"\u003cp\u003e\u003cspan\u003eThis is a rubber SUB mount stabilizer kit to help reduce vibration to the hands and it mounts to the stock triple clamp. Sub mount comes assembled with medium compound bushings and additional soft compound bushings are included. The kit includes everything you need to make the installation easy and quick. This kit raises the handlebars 38mm and moves them forward 13mm, a position we found to be very popular for 1190 Adventure and R models. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 1090 Adventure 2017-2019\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 1190 Adventure\/R 2013-2017\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 1290 Adventure\/R\/S\/T 2015-2020\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Complete Kit","offer_id":24325270851,"sku":"DS-SUB-9164-01R","price":724.0,"currency_code":"USD","in_stock":true},{"title":"Mount Kit Only","offer_id":24325471939,"sku":"DM-SUB-9164-01R","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/1190_adv_scotts_damper_kit.jpg?v=1734135775"},{"product_id":"scotts-rubber-mount-only","title":"Scotts Rubber Sub Mount Kit Only KTM 350\/500 EXC\/XCF-W 2012-2015","description":"\u003cp\u003eThe Mount-Kit-Only includes everything except the stabilizer and link arm. This kit is designed to be used with the stock triple clamp and oversize handlebars. The Rubber SUB mount shown here in black, bolts to the stock triple clamp and converts your solid mounted triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars. MED and SOFT compound bushings are provided. The SUB mount locates the bars between the #2 and #3 positions. Step by step pictured instructions are included along with all the necessary hardware.\u003c\/p\u003e\n\u003cp\u003eRaises the bar location approximately 11-25mm, depending on the model of bike.\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 500 EXC 2012-2015\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 350 XCF-W 2015\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":15960323260510,"sku":"DM-SUB-5929-08R","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/2012500excSUBmountonly.jpg?v=1734135843"},{"product_id":"scotts-puller","title":"Scotts Stabilizer Link Arm Puller","description":"\u003cp\u003eThe Link Arm Puller allows you to remove and replace the link arm without damage to the seal area on the bottom of the stabilizer. The Puller is also essential for those of you who plan to service your stabilizer yourselves.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe link arm can be mounted in two different positions depending on your application. A lot of Enduro riders using the computer prefer the stabilizer to be mounted opposite of the standard position in order to accommodate an area for the computer. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eThis is a universal fit part; it may or may not fit without modification.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":23691137091,"sku":"9007-03","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/link_arm_puller.jpg?v=1734136433"},{"product_id":"scotts-rubber-mounted-sub-mount-kit","title":"Scotts Rubber Sub Mount Kit Only KTM 690 Enduro\/R\/SMC 2008-2019","description":"\u003cp\u003e\u003cspan\u003eThe kit includes everything except the stabilizer and link arm. By utilizing specially designed Poly-Urethane bushings we can offer a vibration dampening handlebar mount that will prevent arm pump and dramatically reduce rider fatigue. MED and SOFT bushings are provided. The frame bracket mounts around the stock ignition switch and blends in nicely with the orange or black frames. All pieces are engineered for a clean fit. slight trimming of plastic shroud covering key area is required. The sub mount raises the bars 11mm and locates them between the #2 and #3 positions on the triple clamp. Lower bend bars are available as an option on this site for anyone wanting lower bar positions. If you have any questions, feel free to call us. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRaises the bar location approximately 11-25mm, depending on the model of bike.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 Enduro\/SMC 2008-2010\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eKTM 690 Enduro\/R 2011-2019 | \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003eSMC 2011-2016\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"KTM 690 End\/SMC '08-'10","offer_id":5077237989407,"sku":"DM-SUB-3528-01R","price":364.0,"currency_code":"USD","in_stock":true},{"title":"KTM 690 End\/R '11-'19 | SMC '11-'16","offer_id":15960380833886,"sku":"DM-SUB-3528-02R","price":364.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/DM-SUB-3528-02R.jpg?v=1734137731"},{"product_id":"scotts-stainless-steel-oil-filter-350-450-530-08-11","title":"Scotts Stainless Steel Micronic Oil Filter KTM END\/MX 2007-2019","description":"\u003cp\u003e\u003cspan\u003e\u003cb\u003e\u003cu\u003eThe Finest Stainless Steel Micronic Oil Filter You Can Buy\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis should be the last oil filter you will ever buy! Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Our stainless filter catches items down to 35 microns \"absolute\", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters. This filter is \u003cb\u003eCleanable and reusable.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhy Scotts is the best:\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSetting the Industry Standard with Technological advancements in product design\u003c\/li\u003e\n\u003cli\u003e10 Years of Engineering, manufacturing and testing\u003c\/li\u003e\n\u003cli\u003eTechnical information and assistance available directly from the manufacturer\u003c\/li\u003e\n\u003cli\u003e3 Pleat welded seam (best sealing and strongest\u003c\/li\u003e\n\u003cli\u003ePasses\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.astm.org\/cgi-bin\/SoftCart.exe\/DATABASE.CART\/REDLINE_PAGES\/F316.htm?E+mystore\"\u003eASTMF316 Test\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor 35 Microns\u003c\/li\u003e\n\u003cli\u003eCertified \"\u003ca href=\"http:\/\/www.sae.org\/technical\/standards\/ARP901A\"\u003eBubble Point\u003c\/a\u003e\" testing on media\u003c\/li\u003e\n\u003cli\u003ePasses 24 hour chemical resistance test\u003c\/li\u003e\n\u003cli\u003eCustom woven media\u003c\/li\u003e\n\u003cli\u003eAble to withstand 600 degrees F.\u003c\/li\u003e\n\u003cli\u003eFull Flow bypass with progressive valving. No need to disassemble for cleaning.\u003c\/li\u003e\n\u003cli\u003eMagnetic pre-filtering (all spin-on models)\u003c\/li\u003e\n\u003cli\u003eWill Manufacture Custom Filters for Specialty and Vintage applications.\u003c\/li\u003e\n\u003cli\u003eStocking orders filled WITHOUT waiting for overseas shipments.\u003c\/li\u003e\n\u003cli\u003eSonic cleaning available from the manufacturer\u003c\/li\u003e\n\u003cli\u003eUsed by the most factory backed riders\u003c\/li\u003e\n\u003cli\u003eLabeled \"4-Stroke insurance\" by MotoCross Action Magazine\u003c\/li\u003e\n\u003cli\u003eRated \"9\" by Dirt Rider Magazine\u003c\/li\u003e\n\u003cli\u003eGiven \"Full Throttle\" rating my Fast By Design\u003c\/li\u003e\n\u003cli\u003eApplications for just about everything that rolls, floats or glides across the snow.\u003c\/li\u003e\n\u003cli\u003e100% In-House design and Manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003e KTM 250 EXC-F 2017-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 SX-F 2013-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 XC-F 2013-2019 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 XCF-W 2014-2016\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 350 EXC-F\/ SX-F\/ XC-F\/ XCF-W 2010-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 400 XC-W 2009-2010\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 EXC-R 2008-2011\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 EXC-F 6days 2017-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 SX-F 2007-2012\/ 2016-2018\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 SX-F \"Factory Edition\" 2015-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 XC-F 2008-2011\/ 2016-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 XC-W 2008-2011\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 EXC-F 2017-2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 505 SX-F\/ XC-F 2007-2009\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 530 EXC-R\/ XCW-R 2008-2011\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":24811866115,"sku":"2167","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/425lg.jpg?v=1734137741"},{"product_id":"scotts-submount-cable-guide","title":"Scotts Sub Mount Cable Guide","description":"\u003cp\u003e\u003cspan\u003eThis Submount Cable Guide is a must-have for KTM’s using Scotts submount, steering stabilizer systems. The guide keeps the throttle cables away from the stabilizer, handlebar clamp and handlebars preventing wear and cable snags that could eventually lead to an expensive, inconvenient or dangerous failure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Submount Cable Guides are machined from a wear resistant, tough copolymer plastic. All fasteners are stainless steel to prevent corrosion. Installation time is less than five minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Submount Cable Guide was designed, built and tested by off-road riders and racers just like you. All of their products are made with pride in the USA. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCable Guide SUB Universal (fits left or right side)\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":31278039875,"sku":"1012-0003","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/08_450XCRW-400x400.jpg?v=1734138138"},{"product_id":"scotts-frame-pin-ktm-690-enduro-2016","title":"Scotts Frame Bracket KTM 690 Enduro\/R\/SMC 2008-2018","description":"\u003cp\u003e\u003cspan\u003eShown here is the frame bracket only which fits around the stock key and matches the forward frame area exactly. This is a very secure mounting system but requires slight trimming of the stock plastic shroud that sits around the key. The instructions show a complete step by step on this installation which is rather easy. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Scotts Stabilizer can be mounted using either the bolt-on frame bracket or the weld-on tower, depending on the user's needs. Shown here is the bolt-on bracket which is for those who just don't want to weld, or don't have the facilities to do so. Most bolt-on brackets have extensive detail machined into the underside to match all the curves and bends of the late model complex frames, both aluminum and steel. The bolt-on \"fit\" can vary from bike to bike depending on how much frame the factory actually gave us to work with. Most are very simple to install, but should you have any questions, we are here to help you. Each frame bracket purchase includes the floating stainless steel tower pin. The Photo attached here may be a generic photo to show you the basic component(s) in the kit, but may not be showing the exact part(s) for your specific bike. (We do not make any weld-on brackets for aluminum framed models, only steel framed bikes).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 Enduro\/R 2008-2018\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 SMC 2008-2010\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":35660348803,"sku":"FBD-3528","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/1023lg.jpg?v=1734140525"},{"product_id":"scotts-sub-mount-kit-ktm-640-adv","title":"Scotts Complete Sub Mount Damper Kit with Triple Clamp KTM 640 Adventure R 2005-2008","description":"\u003cp\u003e\u003cspan\u003eThis Complete Sub Mount Stabilizer Kit includes a billet 5-star rated Aluminum upper triple clamp to enhance steering and reduce rider fatigue. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe triple clamp utilizes rubber mounted handlebar mounts on a billet triple clamp for less vibration. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe triple clamp has to be replaced in order to physically get the stabilizer in such a small space. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe kit also retains the stock key-lock mechanism and includes a new billet key bracket. The stock key switch bolts must be drilled out in order to remove them a relatively simple operation explained in the instructions. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit is a dramatic improvement for this motorcycle and is endorsed by Scot Harden of KTM Adventure Tours and Jimmy Lewis of Dakar Rally fame and has been used by the KTM Factory on their Paris-Dakar race bikes for years.\u003c\/p\u003e\n\u003cp\u003eThe term 'SUB' stands for 'Stabilizer Under Bars'. Scotts designed a Triple Clamp to accept the SUB mount putting the Stabilizer Under the Bars while still allowing access for on-the-fly adjustment. The beauty of this design is; you can take your stabilizer from one bike to another without having to buy another stabilizer. The stabilizer unbolts from the mounting components on all of our kits. In addition, our triple clamps received the highest 5-star rating from multiple leading National Magazines, including Dirt Rider and Motocross Action. This triple clamp kit is machined from a 6061 billet block of aluminum and then anodized to give your model that \"Factory bike\" look, while increasing performance in strength, stability, steering and adding clamping surface. Some off-road bikes have such large, awkward triple clamps that stabilizer installation and fuel tank options have become very difficult. The Scotts\/BRP triple clamps are machined to be very attractive and extremely functional, eliminating the majority of problems associated with many after market triple clamps. They also make some triple clamps exclusively that cannot be found anywhere but at Scotts. The Sub Mount kit is designed to use 1 1\/8\" (28mm) oversize handlebars but can be converted back to standard 7\/8\" (22mm) diameter bars by using our optional bar reducers. The SUB Mount Triple clamp kit, in most cases, includes the Scotts\/BRP Triple Clamp with matching anodized barclamp, Scotts steering stabilizer, linkarm, SUB mount frame bracket, all the necessary hardware, step by step pictured instructions and the Owners Manual. The SUB mount typically raises the position of the bars approximately 11-25mm, depending on the model.\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 640 Adventure R 2005-2008\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":36028895171,"sku":"DT-SUB-5931-640","price":917.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/640_Scotts.png?v=1734140810"},{"product_id":"scotts-sub-mount-stabilizer-kit-ktm-350-exc-f-2016","title":"Scotts Complete Sub Mount Damper Kit KTM Enduro\/MX 2012-2016 Husqvarna FE 450 2015-2016","description":"\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eThe stabilizer mounted on this bike is a huge improvement to the handling characteristics. This kit is designed to be used with the stock triple clamp and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp. The stock lower perches then bolt to the SUB mount allowing the stabilizer to slip in under the bars. Your model may have black or Silver triple clamps depending on the bike. The SUB mount will raise the bars 25mm and allows the bars to be run in positions #3 and #4. Positions #1 and #2 can not be used.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eSUB Mount \/ Complete Stabilizer Kit Solid\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eKTM\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 125 SX 2012-2015\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM150 SX\/ XC 2012-2015\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 200 XCW 2012-2016\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 250 SX 2012-2015\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 250 SX-F 2012-2015\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 250 XC 2012-2015\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 250 XC-F 2012-2015\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003ci\u003eKTM 250 XCW 2012, \u003c\/i\u003e\u003c\/b\u003e\u003cb\u003e\u003ci\u003e2016\u003c\/i\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 250 XCF-W 2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 300 XC 2012-2015\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 300 XCW 2012, 2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 300 XCW 6 days 2014-2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 350 EXC-F 2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 350 SX-F 2012-2015\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 350 XC-F 2012-2015\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 350 XCF-W 2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 350 XCF-W 6-days 2014-2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 450 SX-F 2012-2015\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 450 SX-F FE 2012-2014\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 450 XC-F 2013-2015\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 450 XC-W 2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 500 EXC \u0026amp; 6 days 2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 500 XC-W 2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003eHusqvarna\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eFE 450 2015-2016\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":8115014238302,"sku":"DS-SUB-5929-01","price":544.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-SUB-5929-01.jpg?v=1742403658"},{"product_id":"scotts-rubber-sub-mount-damper-kit-ktm-500-exc-2012-2015","title":"Scotts Complete Rubber Sub Mount Damper Kit KTM 250\/300\/350\/450\/500 XC-W\/XCF-W\/EXC\/EXC-F 2012-2015","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThis Complete Rubber Sub Mount Stabilizer Kit is designed to be used with the stock triple clamp and oversize handlebars. The Rubber SUB mount shown here in black, bolts to the stock triple clamp and converts your solid mounted triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMED and SOFT compound bushings are provided.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe SUB mount locates the bars between the #2 and #3 positions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStep by step pictured instructions are included along with all the necessary hardware.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandard diameter bars can be used in some cases but would require our Bar Reducers which can be sold separately, if needed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe cable guide and large knob in this photo are optional and not part of the basic kit.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e*The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 XC-W 2013-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 XCF-W 2012-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 300 XC-W 2013-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 350 EXC-F 2012-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 350 XCF-W 2012-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 XC-W 2012-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 EXC 2012-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 XC-W 2012-2015\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":15960342691934,"sku":"DS-SUB-5929-08R","price":674.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/2012_500excdamperkit.jpg?v=1734145479"},{"product_id":"scotts-rubber-sub-mount-damper-kit-ktm-500-exc-2017-2019","title":"Scotts Complete Sub Mount Damper Kit KTM 150\/250\/300\/350\/500 XC-W\/EXC-F 2019 GasGas EC 300 TPI 2021-2022","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Complete Solid Sub Mount Stabilizer Kit is designed to be used with the stock triple clamp and oversize handlebars. The Rubber SUB mount shown here in black, bolts to the stock triple clamp and converts your solid mounted triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMED and SOFT compound bushings are provided.\u003c\/li\u003e\n\u003cli\u003eThe SUB mount locates the bars between the #2 and #3 positions.\u003c\/li\u003e\n\u003cli\u003eStep by step pictured instructions are included along with all the necessary hardware.\u003c\/li\u003e\n\u003cli\u003eStandard diameter bars can be used in some cases but would require our Bar Reducers which can be sold separately, if needed.\u003c\/li\u003e\n\u003cli\u003eThe cable guide and large knob in this photo are optional and not part of the basic kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"txtHint\"\u003e\u003cform name=\"Stabilizer_Order\" id=\"Stabilizer_Order\" method=\"POST\" action=\"https:\/\/www.coolcart.net\/shop\/coolcart.aspx\/Scotts\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/form\u003e\u003c\/div\u003e\n\u003cdiv id=\"logoParade\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eKTM\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv style=\"display: inline !important;\"\u003e\u003cem\u003e\u003cstrong\u003eKTM 150 XC-W 2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250\/300 XCW TPI \u0026amp; Six Days 2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 350\/500 EXC-F 2019\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eGasGas\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eEC 300 TPI 2021-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":15960347508830,"sku":"DS-SUB-5925-02R","price":674.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/2012_500excdamperkit_421d1002-25ec-4b38-b26f-7ef4e3104e74.jpg?v=1734145481"},{"product_id":"scotts-rubber-sub-mount-damper-kit-husqvarna-701-enduro-sm-2016-2019","title":"Scotts Complete Rubber Sub Mount Damper Kit KTM 690 Enduro\/R\/SMC R 2019-2024 Husqvarna 701 Enduro\/SM 2016-2024","description":"\u003cp\u003e\u003cspan\u003eShown here is the Complete Rubber Sub Mount Stabilizer Kit (Stabilizer Under Bars) for the 701 Enduro and SM. By utilizing specially designed Poly-Urethane bushings we can offer a vibration dampening handlebar mount that will prevent arm pump and dramatically reduce rider fatigue. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMED (red) and SOFT (blue) bushings are provided.\u003c\/li\u003e\n\u003cli\u003eThe frame bracket mounts around the stock ignition switch and blends in nicely with the stock frame.\u003c\/li\u003e\n\u003cli\u003eAll pieces are engineered for a clean fit. Slight trimming of plastic shroud covering key area is required.\u003c\/li\u003e\n\u003cli\u003eThe sub mount raises the bars 15mm, normally more desirable on this bike, but retains them in the same front to rear position as the stock #1 position. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Note: This unit cannot be used with Cycra center reach mount (CRM) handguards.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eKTM\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 Enduro\/R 2019-2024\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 690 SMC R 2019-2024\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eHusqvarna\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003e701 Enduro\/SM 2016-2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":15960405803102,"sku":"DS-SUB-3529-01R","price":820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/scotts701damper.jpg?v=1734145482"},{"product_id":"scotts-rubber-sub-mount-kit-only-ktm-300-xcw-tpi-2019","title":"Scotts Sub Mount Kit Only KTM 250\/300\/350 XCW TPI\/EXC-F 2019","description":"\u003cp\u003e\u003cspan\u003eThe Mount-Kit-Only includes everything except the stabilizer and link arm. This kit is designed to be used with the stock triple clamp and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp. The stock lower perches then bolt to the SUB mount allowing the stabilizer to slip in under the bars. The SUB mount allows the bars to be run in positions #3 and #4. Positions #1 and #2 can not be used.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRaises the bar location approximately 11-25mm, depending on the model of bike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"txtHint\"\u003e\n\u003cform method=\"POST\" id=\"Stabilizer_Order\" name=\"Stabilizer_Order\" action=\"https:\/\/www.coolcart.net\/shop\/coolcart.aspx\/Scotts\"\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/form\u003e\n\u003c\/div\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 250 XC-W TPI 2019\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 300 XC-W TPI 2019\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 350 EXC-F 2019\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":15991566925918,"sku":"DM-SUB-5925-02R","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/2012500excSUBmountonly_16e25fc5-0313-42d4-82a4-8570d4790b17.jpg?v=1734145538"},{"product_id":"scotts-complete-rubber-sub-mount-damper-kit-ktm-790-adventure-r-2019","title":"Scotts Complete Rubber Sub Mount Damper Kit KTM 790\/890 ADV\/R 2018-2024","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe kit includes, Sub mounted Stabilizer kit utilizing Rubber bar mounts to eliminate vibration and fatigue including an extra set of different density rubber mounts, with handlebar mounts locating the bars approximately 25mm higher and 4.5mm forward from stock, a much more desirable position on this model.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMED and SOFT bushings are provided.\u003c\/li\u003e\n\u003cli\u003eThe frame bracket mounts around the stock ignition switch and blends in nicely with the stock frame.\u003c\/li\u003e\n\u003cli\u003eAll pieces are engineered for a clean fit. Slight trimming of plastic shroud covering key area is required.\u003c\/li\u003e\n\u003cli\u003eThe sub mount raises the bars 15mm, normally more desirable on this bike, but retains them in the same front to rear position as the stock #1 position. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions.\u003c\/span\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 790 Adventure\/R 2018-2020\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e\u003ci\u003eKTM 890 Adventure\/R 2021-2024\u003c\/i\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":29392167993438,"sku":"DS-SUB-3550-01R","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/scotts_790.jpg?v=1734146504"},{"product_id":"scotts-stabilizer-kit-ktm-950-super-enduro-2007","title":"Scotts Stabilizer Kit KTM 950 Super Enduro 2007","description":"\u003cp\u003e\u003cspan\u003eThe Scotts Stabilizer can be mounted using either the bolt-on frame bracket or the weld-on tower, depending on the user's needs. Shown here is the bolt-on bracket which is for those who just don't want to weld, or don't have the facilities to do so. Most bolt-on brackets have extensive detail machined into the underside to match all the curves and bends of the late model complex frames, both aluminum and steel. The bolt-on \"fit\" can vary from bike to bike depending on how much frame the factory actually gave us to work with. Most are very simple to install, but should you have any questions, we are here to help you. Each frame bracket purchase includes the floating stainless steel tower pin. The Photo attached here may be a generic photo to show you the basic component(s) in the kit, but may not be showing the exact part(s) for your specific bike. (We do not make any weld-on brackets for aluminum framed models, only steel framed bikes).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"column whole medium-half product-information--purchase\"\u003e\n\u003cdiv class=\"column whole np product-information--description\"\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eThis is a bolt-on bracket only and utilizes the two tapped holes in front of the gas tank. This works with after market fuel tanks as well.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":39690368876638,"sku":"FBD-3544","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/1454lg.jpg?v=1734150436"},{"product_id":"scotts-bar-mount-reducers","title":"Scotts Bar Mount Reducers","description":"\u003cp\u003e\u003cspan\u003eBar Reducers (Black in color): Scotts now offers special spacers that allow you to reduce the perch-hole diameter from oversize, back to standard diameter, which allows the use of standard diameter bars in the oversize perches. Keep in mind, when using standard diameter bars with our stabilizer, that the crossbar to main bar clearance must be a minimum of 40mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":39787022975070,"sku":"BMO-1125-875K","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/products\/BMO-1125-875K.jpg?v=1734151021"},{"product_id":"scotts-rubber-sub-mount-kit-only-ktm-950-990-smr-2007-2008","title":"Scotts Rubber Sub Mount Kit Only KTM 950\/990 SMR 2007-2008","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe \"mount-kit-only\" for this model is designed for the user who already has a Stabilizer and link arm. The mount-kit includes a new billet upper Triple clamp with the SUB mount installed, RSA style rubber-mounted bar mounts to reduce vibration and rider fatigue, a new billet key-mounting plate, frame bracket, tower pin, a tool for holding the forks tight during installation, step by step instructions-including how to remove the stock key assembly, Owners Manual and all necessary hardware. The stock key bolts must be drilled out on this model, but we provide the \"how to\" in the instructions. The triple clamp will raise the bars 10mm and move them forward 21mm for a more desired riding position. This kit is endorsed by Dakar participants Jimmy Lewis and Scot Harden. Note: All SUB mounts require the stepped link arm, installed in the reverse position as shown in this picture. Order a linkarm puller to reverse the arm if yours is not already like the photo. Call or email us if you have any questions. More photos of this model can be viewed from the photos tab on the home page. The stabilizer mounted on the SMR is a major improvement due to the steep steering angle on this model.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003cem\u003e\u003cstrong\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":40033430044766,"sku":"DM-SUB-3545-27","price":422.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/540lg.jpg?v=1734162448"},{"product_id":"scotts-stabilizer-kit-ktm-500-exc-2012-2016","title":"Scotts Stabilizer Kit KTM 250 XCF-W 2014, 500 EXC 2012-2016","description":"\u003cdiv id=\"txtHint\"\u003e\u003cform name=\"Stabilizer_Order\" id=\"Stabilizer_Order\" method=\"POST\" action=\"https:\/\/cloud2.shopsite.com\/sc\/order.cgi\"\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"StabTextPhoto\"\u003eThe bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include a Stabilizer, link arm, handlebar clamp, frame backet, step by step pictured instructions, owners manual and applicable hardware. Some models may require replacement handlebars. We can assist you in that choice also. If you have any questions regarding any installation guidelines or special applications, please give us a call. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\u003c\/div\u003e\n\u003cdiv id=\"logoParade\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 XCF-W 2014\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold; font-style: italic;\"\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 EXC 2012-2016\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":40180658307166,"sku":"DS-5967-08","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/1936lg.jpg?v=1734163115"},{"product_id":"ds-sub-5930-02r","title":"Scotts Complete Sub Mount Damper Kit KTM\/Husqvarna Enduro 2020-2022","description":"\u003cp\u003e\u003cspan\u003eThis kit is designed to be used with the stock triple clamp and oversize handlebars. The Rubber SUB mount shown here in black, bolts to the stock triple clamp and converts your solid mounted triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars. MED and SOFT compound bushings are provided. The SUB mount locates the bars between the #2 and #3 positions. Step by step pictured instructions are included along with all the necessary hardware. Standard diameter bars can be used in some cases but would require our Bar Reducers which are available here, on line, as an option, if needed. The cable guide and large knob in this photo are optional and not part of the basic kit.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003c\/span\u003e\u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv id=\"txtHint\"\u003e\u003cform action=\"https:\/\/www.coolcart.net\/shop\/coolcart.aspx\/Scotts\" method=\"POST\" id=\"Stabilizer_Order\" name=\"Stabilizer_Order\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/form\u003e\u003c\/div\u003e\n\u003cdiv id=\"logoParade\"\u003e\u003c\/div\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eKTM\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv style=\"display: inline !important;\"\u003e\u003cem\u003e\u003cstrong\u003eKTM 150 XC-W TPI 2020-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 \u003cmeta charset=\"utf-8\"\u003eXC-W TPI 2020-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 300 \u003cmeta charset=\"utf-8\"\u003eXC-W\u003cspan\u003e \u003c\/span\u003eTPI 2020-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 300 \u003cmeta charset=\"utf-8\"\u003eXC-W SIX DAYS TPI 2020-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 250 EXC-F 2020\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 350 EXC-F 2020-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 EXC-F SIX DAYS 2020\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 EXC-F 2020-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 XCW-F 2020-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eHusqvarna\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eFE 501 S 2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":40254955290718,"sku":"DS-SUB-5930-02R","price":685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/2239lg.jpg?v=1734163212"},{"product_id":"scotts-complete-rubber-sub-mount-damper-kit-ktm-300-xc-w-tpi-2024","title":"Scotts Complete Rubber Sub Mount Damper Kit KTM MX\/Enduro 2024","description":"\u003cp\u003e\u003cspan\u003eThis SUB mount kit fits the OEM Billet and Forged Triple clamps. The applications using stock Rubber mounted triple clamps will now be a \"SOLID\" mounted system. The Rubber SUB mount will sit on our solid cone system. The stock rubber bar cones are very soft and are susceptible to distortion in the event of a crash. None of Stock bar mounting components are used with this kit. This SUB mount kit will raise the bars 24mm in height and locates the bars in Position 2 \/ 7mm forward from stock. MED and SOFT compound bushings are provided for individual preferences. The new design frame bracket consists of three parts. on most models, installation is done without removing the top triple clamp. Models equipped with a factory steering lock will require the locking device to be removed as it will not clear the damper mounting components. Removal of the steering lock does require the triple clamp to be taken off and then re-installed. Step by step pictured instructions are included along with all the necessary hardware.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems (GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003c\/span\u003e\u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 300 XC-W Hardenduro 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 SX-F 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 XC-F 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 XCF-W 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 EXC-F 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":40413189701726,"sku":"DS-SUB-6125-01R","price":842.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-SUB-6125-01R.jpg?v=1748896482"},{"product_id":"scotts-complete-solid-sub-mount-damper-kit-ktm-300-xc-w-tpi-2024","title":"Scotts Complete Solid Sub Mount Damper Kit KTM MX\/Enduro 2024","description":"\u003cp\u003e\u003cspan\u003eThis SUB mount kit fits the OEM Billet and Forged Triple clamps. The stock Rubber mounted triple clamps will now be a \"SOLID\" mount system. None of Stock bar mounting components are used with this kit. This SUB system will raise the bars 24mm in height and has two front to back bar positions that equate to the the options available with stock bar mounting. The new design frame bracket consists of three parts. on most models, installation is done without removing the top triple clamp. Models equipped with a factory steering lock will require the locking device to be removed as it will not clear the damper mounting components. Removal of the steering lock does require the triple clamp to be taken off and then re-installed. Step by step pictured instructions are included along with all the necessary hardware.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003c\/span\u003e\u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 300 XC-W TPI 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 SX-F 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 XC-F 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 450 XCF-W 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eKTM 500 EXC-F 2024\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":40413191012446,"sku":"DS-SUB-6125-01","price":768.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/2312lg.jpg?v=1734182061"},{"product_id":"ds-4551-00","title":"Scotts Weld-On Stabilizer Kit","description":"\u003cp\u003e\u003cspan\u003eThe weld on kit is relatively easy to install by only requiring 2 small welds, one on each side of the frame bracket about 1\/2\" long. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. The frame bracket is a universal, weldable tower, that can be adjusted to accommodate different height applications and frame shapes. Because the weld-on tower doesn't have to mount around the head tube, it is very narrow and compact, lending itself quite nicely to applications where space between the gas tank and head tube is narrow. Weld-on towers are normally a stronger option and removal of a weld on tower is quite simple. Each kit includes a Stabilizer, handlebar bracket, weld-on tower, instruction manual and applicable hardware. \u003c\/span\u003e\u003cspan style=\"color: red;\"\u003e(The weld-on kit is not for Aluminum Frames. See Bolt-on Kits).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eT\u003cspan\u003ehe Super Duke gets a serious upgrade to handling and steering precision by adding the stabilizer. This kit bolts on in minutes and enhances this bike considerably. It's nice looking too.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eThis is a universal fit part; it may or may not fit without modification.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Top Mount","offer_id":40621777322078,"sku":"DS-4551-00-TOP","price":472.0,"currency_code":"USD","in_stock":true},{"title":"Sub Mount","offer_id":40621777354846,"sku":"DS-4551-00-SUB","price":472.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/167lg.jpg?v=1734190459"},{"product_id":"scotts-complete-stabilizer-kit-solid-ktm-ktm-790-adventure-r-2018-2020-890-adventure-r-2021-2024","title":"Scotts Complete Stabilizer Kit Solid | KTM KTM 790 Adventure\/R 2018-2020, 890 Adventure\/R 2021-2024","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eShown here is the complete bolt on SUB mount kit for the 790\/890 Adventure and R models and the Husqvarna 901 Norden Adventure, (the Husky requires some minor tank shroud mods. the mods can be seen in the \"mounting instructions\" above). This is a substantial improvement to this model. This is a Solid SUB mount without rubber dampening. It mounts to the stock triple clamp. The kit includes everything you need to make the installation easy and quick. This kit raises the bars 25mm and allows for 4 front to back bar positions (stock, 7mm, 15mm and 22mm forward).\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 790 Adventure\/R 2018-2020\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 890 Adventure\/R 2021-2024\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41213453762654,"sku":"DS-SUB-3550-01","price":537.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/scott.jpg?v=1734191849"},{"product_id":"scotts-sub-mount-complete-stabilizer-kit-solid-type-using-stock-triple-clamps","title":"Scotts SUB Mount\/Complete Stabilizer Kit\/Solid type\/using stock triple clamps Husqvarna TX 300i 2022","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis kit is designed to be used with the stock triple clamp and stock lower bar cradle or individual bar mounts. This SUB mount kit is designed to convert the stock Rubber mounted triple clamp to a \"SOLID\" mount system. This kit is for those who want a stiffer feel in the bars and want to eliminate any flex incurred with rubber mounted handle bars. This SUB mount system will raise the bars 23mm in height and keeps them in the same relative position front to back as the stock bar mounting. An hour meter relocation bracket is included for models with these meters stock. Step by step pictured instructions are included along with all the necessary hardware. **This kit will not work with the Scotts\/BRP HD bar cradle.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003e*The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eHusqvarna TX 300i 2022\u003c\/em\u003e\u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41332907376734,"sku":"DS-SUB-5930-01","price":614.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-SUB-5930-01.jpg?v=1734193380"},{"product_id":"scotts-sub-mount-complete-stabilizer-kit-rubber-type-using-stock-triple-clamps","title":"Scotts SUB Mount\/Complete Stabilizer Kit\/Rubber type\/using stock triple clamps Husqvarna TX 300i 2022","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis kit is designed to be used with the stock triple clamp and oversize handlebars. The stock rubber bar cones are very soft and are susceptible to distortion in the event of a crash. For this kit, the stock rubber cones are replaced with solid aluminum cones and we then supply our Rubber mounted Sub mount. This retains Rubber mounting and is more effective. This SUB mount kit will raise the bars 24mm in height and locates the bars in Position 2 \/ 7mm forward from stock. MED and SOFT compound bushings are provided for individual preferences. An hour meter relocation bracket is included for models with these meters stock. Step by step pictured instructions are included along with all the necessary hardware. Standard diameter bars can be used in some cases but would require our Bar Reducers which are available here, on line, as an option, if needed. Note: Picture here is shown with optional Hand guard mounts.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003e*The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHusqvarna TX 300i 2022\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41332909015134,"sku":"DS-SUB-5930-01R","price":725.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-SUB-5930-01R.jpg?v=1734193382"},{"product_id":"scotts-sub-mount-complete-stabilizer-kit-with-triple-clamp-husqvarna-tx-300i-2022","title":"Scotts SUB Mount\/Complete Stabilizer Kit\/with Triple Clamp Husqvarna TX 300i 2022","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe term SUB stands for Stabilizer Under Bars. We designed a Triple Clamp to accept the SUB mount putting the Stabilizer Under the Bars while still allowing access for on-the-fly adjustment. The beauty of this design is; you can take your stabilizer from one bike to another without having to buy another stabilizer. The stabilizer unbolts from the mounting components on all of our kits. In addition, our triple clamps received the highest 5-star rating from multiple leading National Magazines, including Dirt Rider and Motocross Action. This triple clamp kit is machined from a 6061 billet block of aluminum and then anodized to give your model that \"Factory bike\" look, while increasing performance in strength, stability, steering and adding clamping surface. Some off-road bikes have such large, awkward triple clamps that stabilizer installation and fuel tank options have become very difficult. The Scotts\/BRP triple clamps are machined to be very attractive and extremely functional, eliminating the majority of problems associated with many after market triple clamps. We also make some triple clamps exclusively that cannot be found anywhere but at Scotts. The Sub Mount kit is designed to use 1 1\/8\" (28mm) oversize handlebars but can be converted back to standard 7\/8\" (22mm) diameter bars by using our optional bar reducers. The SUB Mount Triple clamp kit, in most cases, includes the Scotts\/BRP Triple Clamp with matching anodized barclamp, Scotts steering stabilizer, linkarm, SUB mount frame bracket, all the necessary hardware, step by step pictured instructions and the Owners Manual. The SUB mount typically raises the position of the bars approximately 11-25mm, depending on the model, which may or may not be an advantage for your riding style. If you should need a different bend of Oversize handlebars, either higher or lower, they are available here online for ordering, at an additional charge. Use the product index and select Handlebars for a full menu of bar selections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*The Photo you are looking at is a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike. The bars in the picture are not included in the kit.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHusqvarna TX 300i \u003cmeta charset=\"utf-8\"\u003e2022\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41332910489694,"sku":"DT-SUB-5930-01","price":772.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DT-SUB-5930-01.jpg?v=1734193384"},{"product_id":"scotts-rubber-sub-mount-damper-kit-ktm-1290-adventure-r-s-t-2021-2025","title":"Scotts Rubber Sub Mount Damper Kit KTM 1290 Adventure\/R\/S\/T 2021-2025","description":"\u003cp\u003e\u003cspan\u003eShown here is the complete bolt on SUB mount kit for the 1290 Adventure models. This is a substantial improvement to this model. This is a rubber SUB mount to help reduce vibration to the hands and it mounts to the stock triple clamp. The SUB mount comes assembled with medium compound bushings and additional soft compound bushings are included. The kit includes everything you need to make the installation easy and quick. This kit raises the handlebars 19mm and moves them forward 18.5mm. You have the option of selecting a rebound or non-rebound style stabilizer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003c\/span\u003e\u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 1290 Adventure\/R\/S\/T 2021-2025\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Off-Road type without rebound damping","offer_id":41438751490142,"sku":"DS-SUB-9165-01R-OR","price":780.0,"currency_code":"USD","in_stock":true},{"title":"Road type stabilizer with rebound damping","offer_id":41438766268510,"sku":"DS-SUB-9165-01R-RD","price":780.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/1908lg.jpg?v=1739222278"},{"product_id":"scotts-rubber-sub-mount-kit-only-ktm-1290-adventure-r-s-t-2021-2025","title":"Scotts Rubber Sub Mount Kit Only KTM 1290 Adventure\/R\/S\/T 2021-2025","description":"\u003cp\u003e\u003cspan\u003eShown here is the Rubber SUB Mount-Kit-Only for the 1290 Adventure models. This kit includes all the necessary hardware to make the installation easy. Also included is the special plus 8mm stepped link arm and a link arm puller to remove existing arm from your damper. The SUB mount comes assembled with medium compound bushings and and a softer set is also included. This application raises the bars 19mm and moves them forward 18.5mm from the stock location. The text below describes the generic information about our SUB mounts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003cstrong\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 1290 Adventure\/R\/S\/T 2021-2025\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41438782881886,"sku":"DM-SUB-9165-01R","price":454.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/2329lg_227b692a-08e1-4767-b3dc-b176ad0bc201.jpg?v=1739223085"},{"product_id":"scotts-top-mount-stabilizer-kit-complete-solid-type-gasgas-ec-300-tpi-2021-2022","title":"Scotts Top Mount Stabilizer Kit Complete \/ solid type GasGas EC 300 TPI 2021-2022","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include a Stabilizer, link arm, handlebar clamp, frame bracket, step by step pictured instructions, owners manual and applicable hardware. Some models may require replacement handlebars. We can assist you in that choice also. If you have any questions regarding any installation guidelines or special applications, please give us a call. \u003cem\u003e\u003cstrong\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eGasGas EC 300 TPI 2021-2022\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41632695222366,"sku":"DS-5970-02","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-5970-02.jpg?v=1744649097"},{"product_id":"scotts-top-mount-stabilizer-kit-complete-rubber-type-gasgas-ec-300-tpi-2021-2022","title":"Scotts Top Mount Stabilizer Kit Complete \/ Rubber type GasGas EC 300 TPI 2021-2022","description":"\u003cdiv id=\"txtHint\"\u003e\u003cform name=\"Stabilizer_Order\" id=\"Stabilizer_Order\" method=\"POST\" action=\"https:\/\/cloud2.shopsite.com\/sc\/order.cgi\"\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"StabTextPhoto\"\u003e\n\u003cb\u003e*Due to various designs and configurations of instruments on many bikes, additional modifications by the installing customer may be required for re-fitment of OEM instrumentation\u003c\/b\u003e. This shows the Rubber mounted Top mount kit complete with Stabilizer and link-arm. The rubber mounts significantly reduce vibration and arm pump. This kit bolts directly to your stock triple clamp and will raise the bars 5mm and will allow the same 4 bar positions as the stock bar mount set up. It comes assembled with medium compound urethane bushings and includes a softer set to allow adjustment for riders preference.\u003cbr\u003e\u003cbr\u003eThe bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include a Stabilizer, link arm, handlebar clamp, frame backet, step by step pictured instructions, owners manual and applicable hardware. Some models may require replacement handlebars. We can assist you in that choice also. If you have any questions regarding any installation guidelines or special applications, please give us a call. \u003cem\u003e\u003cstrong\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\u003c\/div\u003e\n\u003cdiv id=\"logoParade\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold; font-style: italic;\"\u003e\u003cem\u003e\u003cstrong\u003eGasGas EC 300 TPI 2021-2022\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41632703709278,"sku":"DS-RDS-5970-02","price":664.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-RDS-5970-02.jpg?v=1744649355"},{"product_id":"scotts-top-mount-stabilizer-kit-complete-solid-type-ktm-525-mxc-2003","title":"Scotts Top Mount Stabilizer Kit Complete \/ solid type KTM 525 MXC 2003","description":"\u003cdiv id=\"txtHint\"\u003e\u003cform action=\"https:\/\/cloud2.shopsite.com\/sc\/order.cgi\" method=\"POST\" id=\"Stabilizer_Order\" name=\"Stabilizer_Order\"\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"StabTextPhoto\"\u003eThe bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include a Stabilizer, link arm, handlebar clamp, frame bracket, step by step pictured instructions, owners manual and applicable hardware. Some models may require replacement handlebars. We can assist you in that choice also. If you have any questions regarding any installation guidelines or special applications, please give us a call.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cem\u003e\u003cstrong\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e\u003c\/div\u003e\n\u003cdiv id=\"logoParade\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 525 MXC 2003\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41648465838174,"sku":"DS-5965","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-5965.jpg?v=1745358981"},{"product_id":"scotts-sub-mount-complete-stabilizer-kit-solid-ktm-525-mxc-2003","title":"Scotts SUB Mount Complete Stabilizer Kit Solid KTM 525 MXC 2003","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003ePhoto may not be your exact model but depicts the same configuration for the SUB MOUNT on your model. The stabilizer mounted on this bike is a huge improvement to the handling characteristics. This kit is designed to be used with the stock triple clamp and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp. The stock lower perches then bolt to the SUB mount allowing the stabilizer to slip in under the bars. Your model may have black or Silver triple clamps depending on the bike. The SUB mount will raise the bars 25mm and allows the bars to be run in positions #3 and #4. Positions #1 and #2 can not be used.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 525 MXC 2003\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41648469934174,"sku":"DS-SUB-5931-01","price":544.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-SUB-5931-01.jpg?v=1745359204"},{"product_id":"scotts-sub-mount-complete-stabilizer-kit-rubber-type-ktm-525-mxc-2003","title":"Scotts SUB Mount Complete Stabilizer Kit \/ Rubber type KTM 525 MXC 2003","description":"\u003cdiv id=\"txtHint\"\u003e\u003cform name=\"Stabilizer_Order\" id=\"Stabilizer_Order\" method=\"POST\" action=\"https:\/\/cloud2.shopsite.com\/sc\/order.cgi\"\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"StabTextPhoto\"\u003eThis kit is designed to be used with the stock triple clamp and oversize handlebars. The Rubber SUB mount shown here in black, bolts to the stock triple clamp and converts your solid mounted triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars. MED and SOFT compound bushings are provided. The SUB mount locates the bars between the #2 and #3 positions. Step by step pictured instructions are included along with all the necessary hardware. Standard diameter bars can be used in some cases but would require our Bar Reducers which are available here, on line, as an option, if needed. The cable guide and large knob in this photo are optional and not part of the basic kit.\u003cbr\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us.\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cem\u003e\u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cb\u003e\u003c\/b\u003e\n\u003c\/form\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eKTM 525 MXC 2003\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41648474292318,"sku":"DS-SUB-5931-01R","price":674.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/DS-SUB-5931-01R.jpg?v=1745359374"},{"product_id":"scotts-large-knob","title":"Scotts Performance Large Knob","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eScotts Performance designed the \"Large Knob\" to be used primarily on bikes with Oversize handlebars or with bars that do not have a crossbar. However, it is possible to use this knob on \"crossbar-type\" bars as long as there is enough clearance for it to physically fit, which is determined by where the crossbar is, relative to the stock knob. Many bikes with crossbars require the smaller knob as the large knob will not clear the crossbar. The larger knob makes a little easier to make quick changes on the fly.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Large Knob price includes all the parts required to make it functional into your existing stabilizer, including a new stainless steel spring and ball for your base valve, and Allen wrenches.\u003c\/span\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41915513110622,"sku":"4016-02","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/Screenshot2025-08-07at7.19.18AM.png?v=1754576370"},{"product_id":"brp-rubber-mount-replacement-rubber-bushings","title":"BRP Rubber Mount Replacement Rubber Bushings","description":"\u003ch3\u003eBRP Rubber Mount Replacement Rubber Bushings\u003c\/h3\u003e\n\u003cp\u003ePoly Urethane Bushings for BRP Rubber Mounted SUB Mounts \u0026amp; 4 Post Triple Clamps.\u003c\/p\u003e\n\u003cp\u003eBRP is now Offering two different durometer bushings (Blue= Soft \u0026amp; Red= Medium)\u003c\/p\u003e\n\u003cp\u003eOne set includes (8) replacement bushings.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"(8) BLUE SOFT BUSHINGS","offer_id":41943334715486,"sku":"SRM-9263-BU70","price":12.0,"currency_code":"USD","in_stock":true},{"title":"(8) RED MEDIUM BUSHINGS","offer_id":41943334748254,"sku":"SRM-9263-BU82","price":12.0,"currency_code":"USD","in_stock":true},{"title":"BOTH BLUE AND RED BUSHINGS","offer_id":41943334781022,"sku":"SRM-9263-BU70+BU82","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/SRM-Bushings.jpg?v=1755199421"},{"product_id":"scotts-stabilizer-bullet-tool","title":"Scotts Stabilizer Bullet Tool","description":"\u003cp\u003e\u003cspan\u003eIf you want to service your own stabilizer, you will need this tool! Made from aluminum, this tool is necessary for installing the main shaft through the stabilizer seals without damaging them. The tool allows the seal to gently expand as it passes over the edge of the main shaft making installation a breeze.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Note: product color may vary.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eThis is a universal fit part; it may or may not fit without modification.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠️\u003cstrong\u003eWARNING\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":41993525657694,"sku":"9007-04","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/249lg.jpg?v=1756333583"},{"product_id":"scotts-complete-sub-solid-mount-damper-kit-ktm-150-250-300-350-500-xc-w-exc-f-2019-2023","title":"Scotts Complete Sub Solid Mount Damper Kit KTM 150\/250\/300\/350\/500 XC-W\/EXC-F 2019-2023","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSUB Mount \/ Complete Stabilizer Kit Solid \/ when using stock triple clamps\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePhoto may not be your exact model but depicts the same configuration for the SUB MOUNT on your model. The stabilizer mounted on this bike is a huge improvement to the handling characteristics. This kit is designed to be used with the stock triple clamp and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp. The stock lower perches then bolt to the SUB mount allowing the stabilizer to slip in under the bars. Your model may have black or Silver triple clamps depending on the bike. The SUB mount will raise the bars 25mm and allows the bars to be run in positions #3 and #4. Positions #1 and #2 can not be used.\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cspan\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cem\u003eKTM 150\/250\/300\/350\/500 XC-W\/EXC-F 2019-2023\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":42132833632350,"sku":"DS-SUB-5930-02","price":555.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/1300lg_abc84cfc-da7c-4336-8f23-98b5d833c5c5.jpg?v=1761324969"},{"product_id":"scotts-complete-sub-solid-mount-damper-kit-ktm-150-250-300-350-450-500-xc-w-exc-f-2017-2018","title":"Scotts Complete Sub Solid Mount Damper Kit KTM 150\/250\/300\/350\/450\/500 XC-W\/EXC-F 2017-2018","description":"\u003cdiv id=\"txtHint\"\u003e\u003cform name=\"Stabilizer_Order\" id=\"Stabilizer_Order\" method=\"POST\" action=\"https:\/\/cloud2.shopsite.com\/sc\/order.cgi\"\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"StabTextPhoto\"\u003e\n\u003cbr\u003e\"SUB\" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. \"Bar reducers\" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro\/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and \"Step by Step\" pictured instructions. If you have any questions, feel free to call or email us.\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eThe Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cem\u003eFITMENT\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch4 style=\"text-align: left;\"\u003e \u003cspan\u003e2018 150 XC-W\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2018 250 EXC-F\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2018 250 XC-W\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2018 300 XC-W\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2018 350 EXC-F\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2018 450 EXC-F SIX DAYS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2018 500 EXC-F\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cspan\u003e2017 150 XC-W\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 250 EXC-F\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 250 XC-W\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 300 XC-W\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 350 EXC-F\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 450 EXC-F SIX DAYS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 500 EXC-F\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/form\u003e\u003c\/div\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":42162531139678,"sku":"DS-SUB-5926-02","price":544.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/1300lg_1.jpg?v=1762451348"},{"product_id":"scotts-performance-frame-bracket-only-bolt-on-sub-mount","title":"Scotts Performance Frame Bracket only (Bolt-on Sub mount)","description":"\u003cp\u003eThis new design frame bracket consists of three parts. on most models, installation is done without removing the top triple clamp. Models equipped with a factory steering lock will require the locking device to be removed as it will not clear the damper mounting components. Removal of the steering lock does require the triple clamp to be taken off and then re-installed. Due to the many possible options on the market for mounting the Scott's Steering Damper to the triple clamp, additional components may be required with the frame bracket purchase. Please contact Scott's for details. Tower pin and collar are included in the price of the frame bracket.\u003c\/p\u003e\n\u003cp\u003eThe Scotts Stabilizer can be mounted using either the bolt-on frame bracket or the weld-on tower, depending on the user's needs. Shown here is the bolt-on bracket which is for those who just don't want to weld, or don't have the facilities to do so. Most bolt-on brackets have extensive detail machined into the underside to match all the curves and bends of the late model complex frames, both aluminum and steel. The bolt-on \"fit\" can vary from bike to bike depending on how much frame the factory actually gave us to work with. Most are very simple to install, but should you have any questions, we are here to help you. Each frame bracket purchase includes the floating stainless steel tower pin. The Photo attached here may be a generic photo to show you the basic component(s) in the kit, but may not be showing the exact part(s) for your specific bike. (We do not make any weld-on brackets for aluminum framed models, only steel framed bikes).\u003c\/p\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":42431189221470,"sku":"FBD-6125","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/2317lg.jpg?v=1769723407"},{"product_id":"scotts-performance-tower-pin-and-collar-7mm-43mm","title":"Scotts Performance Tower Pin And Collar (-7mm, 43mm)","description":"\u003cp\u003eScotts Performance Tower Pin And Collar (-7mm, 43mm)\u003c\/p\u003e\n\u003cp\u003eFor use on Scotts under bar \/sub mount dampers: \u003ca rel=\"noopener\" href=\"https:\/\/www.scottsonline.com\/Stabilizer_Parts.php\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e#28 on this diagram\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":42431258591326,"sku":"TPN-4033-11","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/TPN-4033-11.jpg?v=1769725226"},{"product_id":"scotts-performance-screw-6-x-20-socket-cap-screw-dirt","title":"Scotts Performance Screw (6 X 20 socket cap screw) Dirt","description":"\u003cp\u003eScotts Performance Screw (6 X 20 socket cap screw) Dirt\u003c\/p\u003e\n\u003cp\u003eSold individually, purchase 2 for kit.\u003c\/p\u003e\n\u003cp\u003eFor use on Scotts dampers: \u003ca href=\"https:\/\/www.scottsonline.com\/Stabilizer_Parts.php\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e#30 on this diagram\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003e\n\u003cem\u003ePROPOSITION 65\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch3 style=\"text-align: center;\"\u003e⚠WARNING\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause Cancer or birth defects and reproductive harm. For more information go to: \u003ca href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\"\u003ehttps:\/\/oehha.ca.gov\/proposition-65\u003c\/a\u003e\u003c\/p\u003e","brand":"Scotts Performance","offers":[{"title":"Default Title","offer_id":42431278514270,"sku":"0620AB-100-WL","price":0.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1381\/3301\/files\/0620AB-100_1.jpg?v=1769725765"}],"url":"https:\/\/ktmtwins.com\/collections\/scotts-performance-parts-lead-time\/ergonomics.oembed","provider":"KTM Twins","version":"1.0","type":"link"}