This race proven slipper clutch will help you keep the back end of this big twin in line while braking into turns.
The function of the slipper clutch is to reduce the pressure on the clutch pack when the engine is in the process of turning the engine. In the case of road racing type slipper clutches, there is no effect on clutch engagement when the engine is in the process of driving the real wheel. During the process of slowing for a turn (Engine Braking) the action of the torque forces the ramps together; the ramps then proceed to ride up on each other, an action which lifts the splined part of the hub off the base.
You will definitely not regret having a slipper clutch if you happen to be a very aggressive street rider or track rider. It is well worth the money on many levels. It costs slightly more than a slip-on-pipe, so it is advisable to save some money by not getting a pipe and instead investing the same for a slip clutch. The ride will be faster, smoother, safer, and with more control. Change in the spring leads to changes in the slip rate. There is less engine-braking from softer springs and more engine-braking from stiffer springs.
The difference in the performance was staggering — transformative. With the slipper clutch in place, engine braking is at a minimum and the ride has now become extremely smooth. The suspension has also turned smoother and is ready for every corner entry. During corner entries and even while descending, the suspension remains smooth and undisturbed; the ride feel is almost like glass.
Fits most KTM 950 and 990 models (LC8) from 2003 on. Can be used on any KTM 990 with original clutch part #60032002000
- KTM 950 Adventure/ Supermoto/ Super Enduro 2003 +onwards
- KTM 990 Adventure/ Supermoto/ Super Duke 2003 +onwards
- Can be used on any KTM with original clutch part #60032002000
This product can expose you to chemicals known to the State of California known to cause Cancer or birth defects and reproductive harm. For more information go to: https://oehha.ca.gov/proposition-65